Heavy Vehicle Driver Licence Nsw

1. Heavy Vehicle Driver Licence Nsw Test

Latest crash dataYou can find detailed road crash data presented via interactive reports inCrashes involving heavy vehicles are often serious because of their size and weight, regardless of who is at fault. While their numbers make up only 2.4 per cent of NSW motor vehicle registrations and 8.3 per cent of kilometres travelled by all NSW vehicles, heavy vehicles are involved in about 17 per cent of all road fatalities.The public education campaign urges all road users to take extra care around trucks. Our has detailed information on fatalities and serious injuries involving heavy trucks.Our for heavy vehicle drivers explain how speeding, fatigue, non-use of seatbelts and dangerous loads can lead to crashes, with heavy vehicle drivers and other road users seriously injured or killed.Any heavy vehicle that is higher than 4.3m is considered overheight in NSW. Drivers need to make sure they know the combined height of their vehicle and its load to avoid.Crash avoidance and have helped reduce the likelihood and severity of crashes.has details of some of the classifications and restrictions that apply to heavy vehicle drivers. Monitoring complianceYou can find details of how road transport laws regarding heavy vehicles are enforced and monitored on the. M1 Pacific Motorway heavy vehicle lane restrictions trialRoads and Maritime Services is carrying out a 12 month trial of from 1 November 2018.

The trial on the motorway will include traffic in both directions between Wahroonga and Kariong.The trial is part of the NSW Government’s commitment to keeping traffic moving on one of the state’s busiest roads and aims to improve road safety, traffic flow and increase driver comfort.

.Heavy vehicle licence classesThis list shows the classes of heavy vehicle licences issued by Roads and Maritime. You can drive any class of vehicle appearing below your licence class in the list, except motorcycles.At the highest level is an MC licence, which allows you to drive all types of vehicles except motorcycles.Click on the link for more detailed information about each licence class:. B-doubles, prime mover, low loader dolly and low loader combinations, road trains.

heavy articulated vehicles. heavy rigid trucks or buses (including articulated buses). medium rigid trucks or buses. small buses or trucks. LR – Light RigidLR vehicles include:. Small trucks with a gross vehicle mass (GVM) up to 8 tonnes. Any towed trailer must not weigh more than nine tonnes GVM.

Buses that seat more than 12 adults including the driver and a GVM up to 8 tonnesTo apply for an LR licence, you must:. Have held a class C licence, (except a learner licence) or equivalent for one year or more. Any time you've spent on a P1 licence counts, but you can't practice to drive an LR vehicle, or upgrade to an LR licence until you hold a P2 or full class C licence. Pass the LR knowledge test. Pass an eyesight test. Successfully complete HVCBA, or pass a Roads and Maritime driving test. MR – Medium RigidMR vehicles include:.

Trucks and buses with a GVM more than eight tonnes and two axles. Any towed trailer must not weigh more than nine tonnes GVM.To apply for an MR licence, you must:. Have held a class C licence, (except a learner licence) or equivalent for one year or more. Any time you've spent on a P1 licence counts, but you can't practice to drive an MR vehicle, or upgrade to an MR licence until you hold a P2 or full class C licence. Pass the MR knowledge test. Pass an eyesight test. Successfully complete HVCBA, or pass a Roads and Maritime driving test.

HR – Heavy RigidHR vehicles include:. Trucks and buses with a GVM more than eight tonnes, and three or more axles. Any towed trailer must not weigh more than nine tonnes GVM. Bendy buses.

Even though these vehicles are articulated, they’re treated as rigid vehicles.To apply for an HR licence, you must:. Have held a class C licence, (except a learner licence) or equivalent for two years or more. Any time you've spent on a P1 licence counts, but you can't practice to drive an HR vehicle, or upgrade to an HR licence until you hold a P2 or full class C licence. Pass the HR knowledge test.

Pass an eyesight test. Successfully complete HVCBA, or pass a Roads and Maritime driving test. HC – Heavy CombinationHC vehicles include:. Articulated vehicles with three or more axles. Heavy rigid vehicle trailer combinations including unladen dolly, with three or more axles. Any towed trailer with a GVM more than nine tonnes.To apply for an HC licence, you must:.

Have held a class MR or HR licence or equivalent for one year or more. Any time you've spent on a P2 MR or HR licence counts, but you can't practice to drive an HC vehicle, or upgrade to an HC licence until you hold a full class MR or HR licence. Pass the HC knowledge test.

Pass an eyesight test. Successfully complete HVCBA, or pass a Roads and Maritime driving test.MC – Multi CombinationMC vehicles include:. B-doubles. Prime mover, low loader dolly and low loader trailer combinations. Road trains.

To apply for an MC licence, you must:. Have held a Class HR or HC licence or equivalent for at least one year. Any time you've spent on a P2 HR licence counts, but you can't practice to drive an MC vehicle, or upgrade to an MC licence until you hold a full class HR or HC licence. Pass an MC knowledge test.

Pass an eyesight test. Successfully complete HVCBA. If you hold an HR licence, you’ll need to pass an HC assessment before you can start MC training.

Pass a medical examination.Heavy Vehicle Competency Based Assessment (HVCBA)The primary method to get a heavy vehicle licence is to complete a Heavy Vehicle Competency Based Assessment (HVCBA) with an accredited Registered Training Organisation (RTO).HVCBA provides the flexibility for your to choose your own trainer. You can also learn, and be assessed, in a vehicle of your choice, and arrange your own appointment times with your trainer.

See for more information.HVCBA may not be available in all areas of NSW. In these areas, you can take a heavy vehicle driving test with a Roads and Maritime testing officer.

Heavy Vehicle Driver Licence Nsw Test

Information for assessorsIf you are an HVCBA assessor, or are interested in becoming accredited as an assessor, see. Heavy vehicle driving testIn areas where HVCBA is not available, you can take a heavy vehicle driving test with a Roads and Maritime testing officer. Please note, not all locations offer heavy vehicle testing.Applicants for licence class MC are not eligible to complete a heavy vehicle driving test.

Applicants for a class MC licence must complete.Important: Before you can take the driving test, you must have passed the knowledge test for the class of licence you’re applying for.See for more information. In-cabin cameraSince 1 December 2014, in-cabin video camera and GPS technology have been rolled out to improve the integrity of the HVCBA Scheme by mitigating fraud and corruption risks. RTOs monitor HVCBA Final Competency Assessments (FCA) completed by assessors for the issue of heavy vehicle driver licences. A video camera must be in operation inside the cabin of the heavy vehicle during the FCA/CT in order to capture and record the end-to-end on road assessment. Your assessor will read out at the beginning and end of each FCA/CT.The industry must be fully compliant with change by 1 September 2015.